February China Putzmeister Spare Parts 1, 2011 - 2D Drafting India Richmond, Virginia 23229 United States 001-716-371-8722 2D Drafting India is a leading structural engineering firm that specializes in providing comprehensive structural pile foundation drawings services. The structural engineering firm serves both, the domestic as well as the off-shore clients with the best pile foundation drawings services consequently. There are two basic parts to a pile foundation: the pile and the pile cap. We are always ready to fulfill your pile foundation drawings requirements. The weight load is distributed across all of the piles used in the structure, and this pile cap load is also transferred to the soil that is located around the pile tip, which is the end of the pile that is driven into the soil. However, it is different in that it puts all of the weight on a pile or a group of piles. It's similar to a spread foot in this way in that it can support a slab, a wall, or a structural column. The soil is actually built up under the ground surface and the deeper the pile, or support pole, goes, the more stable the structure should be. The pile is the structural stilt that is driven into the ground. A wide range of pile type is available for application with various soil type and structural requirements. The purpose of a pile foundation is to transfer and distribute load through a material or stratum with inadequate bearing, sliding or uplift capacity to a firmer stratum that is capable of supporting the load without detrimental displacement. - Steel H-Piles - Steel Pipe Piles - Precast Concrete - Cast-In-Place Concrete - Mandrel-Driven Piles - Timber This type of pile foundation allows any type of structure to actually be supported by a layer or layers of soil. The pile cap serves as the base of the structure.